English
Deutsch
Français
Español
Português
Türk
Pусский
عربي
Melayu
Indonesia
After the stretch film slitter rewinder has been used for a long period of time, the turntable does not rotate frequently during its use. What is the reason for this phenomenon?
1. The first thing to be checked is the inverter of stretch film slitter rewinder. When there is no display on it, it means that it has been burned out, and it must be replaced in time. There is a display, but the displayed situation is different from the data we usually see. At this time, it may be that the parameter setting is wrong. Just reset it according to the requirements of the technical department。
2. The second thing to check is the chain of the inverter, adjust the distance between the large and small sprocket, and then re-link the connection.
3. Another possibility is that the turntable reducer itself has a malfunction, and then the reducer must be replaced.
